Exclusive Tiling Limited


Tiling Specialists


 

 

 

 

Tile Saws with Sliding Plane

 

Suitable for cutting and beveling all materials used in the construction trade. Their lightweight space-saving features make them easily transportable. The sheet steel structure is protected against corrosion by galvanization and painting with high-resistance epoxy paint. The sealed induction motor requires no maintenance. The switch is also sealed, and is fitted with a device protecting against restarting in case of power supply interruptions. Supplied complete with diamond blade; continuous-crown, but close-tooth and turbo blades can also be fitted according to the material and thickness to be cut.

The rotating diamond blade is bathed in water from the lower tank, depositing all dust produced during cutting. The tank containing cooling water and cutting wastes can be easily removed for rapid cleaning. Built to CE standards. Models with sliding table mounted on bearings are more practical and precise, allowing cutting and beveling to be performed simultaneously at any tilt angle and/or diagonal angle on a wide range of work pieces. The swiveling measurement bar supporting the work piece can also rotate up to 45° in both directions, and can be easily removed to allow work pieces of unlimited length to be cut.

 

Model: 9P
Effective Cutting Length: 42cm
Diagonal cut: 30 x 30 cm
Max Cutting Thickness: 4 (Ø 200) 5,5 (Ø 230)
Single Phase Motor: 230 - 240 - 115 V
Motor Power: 750W (1HP)
RPM: 2800rpm
Blade and Shaft Hole Diameters: 200 - 30 230 - 30
Net Weight: 22kg
Carton Dimensions: 61 x 52 x 43cm

 

 

 

 

Purchase Sigma Tile Saw 9P
Purchase Tile Saw 9P-230 £920.00
Purchase Tile Saw 9P-115 £977.50
Purchase Folding Bench for Saw 9P £200.10

Machine for professional use, for practical and convenient work on formats up to 50×50 cm and thicknesses up to 8.5 cm. Work table movement on bearings. Art. 9M1 available with 250 mm diameter blade and 1100 W motor , Art. 9M6 available with 300 mm diameter blade, 2200 W motor and stand Art. 63A. On request, Art. 9M1 can be supplied with 2200 W motor and 300 mm diameter blade and stand, in the configuration specified by customer. On both models an additional square can be fitted on the right (Art. 85G1), permitting guided cuts of unlimited length.

 

Tile Saw 9M1 and 9M6Model: 9M1
Effective Cutting Length: 55cm
Diagonal cut: 40 x 40 cm
Max Cutting Thickness: 6mm
Single Phase Motor: 230 - 240 - 115 V
Motor Power: 1100W (1.5HP)
RPM: 2800rpm
Blade and Shaft Hole Diameters: 250 - 30 300 - 30
Net Weight: 35kg
Carton Dimensions: 75 x 62 x 53cm

 

Model: 9M6
Effective Cutting Length: 52cm
Diagonal cut: 38 x 38 cm
Max Cutting Thickness: 8.5mm
Single Phase Motor: 230 - 240 - 115 V
Motor Power: 2200W (3.0HP)
RPM: 2800rpm
Blade and Shaft Hole Diameters: 250 - 30 300 - 30
Net Weight: 39kg
Carton Dimensions: 75 x 62 x 53cm

 

Purchase Sigma Tile Saw 9M1 / 9M6
Purchase Tile Saw 9M1-230 £1460.04
Purchase Tile Saw 9M1-115 £1473.84
Purchase Tile Saw 9M6-230 £1766.40
Purchase Tile Saw 9M6-115 £1787.10
Purchase Folding Bench for 9M saws £213.90

10MModel: 10M
Effective Cutting Length: 60cm
Diagonal cut: 43 x 43 cm
Max Cutting Thickness: 8mm
Single Phase Motor: 230 - 240 - 115 V
Motor Power: 2200W (3.0HP)
RPM: 2800rpm
Blade and Shaft Hole Diameters: 300 - 30
Net Weight: 56kg
Carton Dimensions: 90 x 70 x 70cm

 

 

 

Purchase Sigma Tile Saw 10M
Purchase Tile Saw 10M-230 £1959.60
Purchase Tile Saw 10M-115 £2263.20
Purchase Folding Bench for Saw 10M £241.50