Exclusive Tiling Limited
Tiling Specialists
ACESIL- Acetic silicone sealant. Free of solvents and resistant against moulds.
MAIN FEATURES
Available in 26 colours
Anti-moulds
Highly flexible
Resistant to UV rays
Frost proof
Optimum resistance against atmospheric agents, years and chemical agents
Impermeable to water and vapour
Excellent workability
ASPECT: viscous paste in 26 colours (see colour chart)
STORAGE: 18 months in a dry and fresh place
FIELDS OF USE
- Silicone-based one-pack sealant which, on contact with the humidity in the air, turns into a permanently elastic rubbery substance
Perfectly resistant to the weather conditions and to many chemical compounds. Due to the various cases they may occur, it may be necessary to do preliminary tests
- ACESIL-310 can be used as a sealant for glass, ceramic, anodised aluminium, metal*, epoxy or polyester panels, wood*
- Suitable for application in the health-hygiene field for forming expansion joints between tiles, tubs, sinks, for sealing showers and forming expansion joints between walls and floor
* after application of Primersil
| Purchase Acesil Silicone Sealant | ||
| Single Tube £5.99 | ||
SKY COLORS - Anti acid epoxy grout
Two-pack anti-acid epoxy grout with glossy colours and delicate finishing. Ideal for areas to be kept perfectly clean. For joints from 2 up to 20 mm in width.
MAIN CHARACTERISTICS
Highly resistant against chemicals
It does not yellow
Optimum workability
Anti-stain
Not-absorbent
High hardness
Very easy to clean
ASPECT: comp. A thick paste in 24 colours (see card), Comp.B viscous liquid
STORAGE: 24 months in a dry place with temperatures between 10° and 30°C
FIELDS OF USE
- Grouting ceramic or stone* floor and wall tiles such as: vitreous or marble mosaic, porcelain stoneware, clinker, in places or surfaces subjected to acid aggression, or in places where it is necessary a not-absorbent joint, such as: dairies, tanneries, paper-mills, laboratory tables, abattoirs, industrial kitchens, etc.
- SKYCOLORS can be used as an adhesive (CLASS R2T in accordance with EN 12004) for glueing the above mentioned cladding to iron and fiberglass reinforced plastic
- Grouting floors subjected to heavy traffic, industrial warehouses, shopping centers, etc.
- Suitable for grouting swimming-pools also if filled with sea-water
* before grouting of a natural stone, it is advisable to check if cleanable
| Purchase Skycolors Epoxy Grout | ||
| Single £28.99 | ||
SKY COLORS SHINE - anti acid epoxy grout with shining colours
Three-pack anti-acid epoxy grout with shining colours.
Ideal for areas to be kept perfectly clean.
For joints from 2 up to 20 mm in width.
MAIN CHARACTERISTICS
Highly resistant against chemicals
Optimum workability
Not-absorbent
Very easy to clean
It does not yellow
Anti-stain
High hardness
Shining colours
ASPECT:
Comp. A: thick paste in 5 colours
Comp. B: viscous liquid
Comp. C: powder in 5 colours
STORAGE: 24 months in a dry place with temperatures between 10° and 30°C
FIELDS OF USE
- Grouting ceramic or natural stone* floor and wall tiles such as: vitreous or marble mosaic, porcelain stoneware, klinker
- In places or surfaces subjected to acid aggression such as: wellness centres, thermal baths, swimming-pools, baths, kitchens, etc.
- Suitable for grouting swimming-pools also if filled with sea-water
* Before grouting of a natural stone, it is advisable to check if cleanable
| Purchase Skycolors SHINE Epoxy Grout | ||
| Single £41.99 | ||
TC-STUK - synthetic rubber latex
MAIN FEATURES
Increases the bond to the tile
Increases the surface hardness
Increases the flexibility
Increases the mechanical strength
Reduces the absorption
ASPECT: White liquid
STORAGE: 12 months in a dry place, sheltered from freezing and high temperatures
FIELDS OF USE
- TC-STUK is used as an additive for the Technostuk G.F.- 2- 12, G.G. and Technocolors grouting line whenever the gaps need greater resistance and compactness, less porosity and absorption, such as: ceramic floors subjected to intensive pedestrian traffic, ceramic cladding fixed on wood, ceramic cladding installed outdoors or in swimming pools, floors subjected to frequent and thorough washing (e.g.: bathrooms and showers in gymnasiums or sports centers)
- TC-STUK must be used instead of water to mix the cementitious grouting. The percentage varies from 20 to 38%, depending on how fine the powder is. The mixture must be creamy and easily applied with a knife. Once the grouting has been completed, no traces of grouting compound or latex must be left on the tile as they would be very difficult to remove once dry
- Used instead of water, TC-STUK will not alter the colour of the grouting in any way. However, it is inadvisable to grout tiles with TC-STUK alongside once grouted with compound mixed with WATER as the different porosity would be noticeable
| Purchase TC-STUK | ||
| Bottle 1Kg £5.99 | ||
| Bottle 5Kg £16.99 | ||
TECHNOCOLORS - Cementitious grouting for gaps from 1 up to 8 mm.
Cementitious grouting for gaps from 1 up to 8 mm with a fine finish and glossy colour.
MAIN FEATURES
Glossy colours
Low water absorption
One-pack product
Highly resistant to abrasion
Resistant to UV rays
Frost proof
ASPECT: fine powder in 25 colours
STORAGE: 18 months in a dry place
FIELDS OF USE
- Grouting all types of ceramic tiles for both interiors and exteriors
- Grouting marble
- Grouting compound for gaps from 1 up to 8 mm
- Swimming pool grouting
- Grouting vitreous mosaic
- Fixing on heating floors
| Purchase TECHNOCOLORS | ||
| Single £12.99 | ||
TECHNO STUK 2-12 - Cementitious grouting compound for 2 to 12 mm gaps.
Cementitious grouting compound for 2 to 12 mm gaps.
MAIN FEATURES
Vast range of colours
Highly resistant to abrasion
One-pack product
Low water absorption
Resistant to UV rays
Frost proof
ASPECT: fine powder in 15 colours
STORAGE: 12 months in a dry place
FIELDS OF USE
- Grouting all types of ceramic tiles for both interiors and exteriors
- Grouting natural stone
- Grouting compound for 2 to 12 mm gaps
- Swimming pool grouting
- Fixing on heating floors
| Purchase TECHNOSTUK 2-12 | ||
| 25Kg Bag £27.99 | ||
| 5Kg Bag £15.99 | ||
TECHNOSTUK GG - Cementitious grouting compound for 4 to 20 mm gaps.
MAIN FEATURES
One-pack product
Low water absorption
Optimum cleanability
Highly resistant to abrasion
Resistant to UV rays
Frost proof
ASPECT: powder in 4 colours
STORAGE: 12 months in a dry place
FIELDS OF USE
- Grouting all types of ceramic tiles for both interiors and exteriors
- Thanks to its special pigmentation and formula, Technostuk G.G. is very easy to spread and cleans off easily when dry, even from porous materials like cotto
| Purchase TECHNOSTUK GG | ||
| 25Kg Bag £27.99 | ||
TOPSTUK - Cementitious grouting compound containing a high percentage of elastomeric resins, for 3 to 15 mm gaps.
Cementitious grouting compound containing a high percentage of elastomeric resins, for 3 to 15 mm gaps.
MAIN FEATURES
good flexibility
one-pack product
water repellent
Highly resistant to abrasion
resistant to UV rays
frost proof
ASPECT: powder in 2 colours
STORAGE: 12 months in a dry place
FIELDS OF USE
- Grouting all types of ceramic tiles for both interiors and exteriors. Particularly suitable for grouting 3 to 15 mm gaps
- TOPSTUK has been formulated for grouting gaps on facades or on outdoor terraces. Thanks to its particular formula, which makes it highly flexible, TOPSTUK provides an optimum resistance to the dimensional variations caused by the thermal shocks to which outdoor ceramic cladding is subjected
| Purchase TOPSTUK | ||
| 25Kg Bag £29.99 | ||